JustMakeWeb.com รับทำเว็บไซต์ รับทำเว็บโรงแรม รับทำเว็บขายของ รับทำเว็บบริษัท เว็บสำเร็จรูป รับทำเว็บร้านค้า ออกแบบเว็บไซต์ ใช้งานได้ง่าย รองรับ SEO โปรโมท GOOGLE ให้ติดอันดับได้อย่างรวดเร็ว , ลงโฆษณาฟรี VPS ราคาถูก
รับทำเว็บไซต์
0
สถิติเว็บไซต์
เปิดเว็บเมื่อ : 2007-03-05
จำนวนสมาชิก : 547 คน
ปรับปรุงเมื่อ : 2021-09-23
จำนวนครั้งที่ชม : 8,287,743 ครั้ง
Online : 46 คน
จำนวนสินค้า : 296 รายการ
ทะเบียนพาณิชย์
สนใจ สงสัย ไลน์ มาได้

 
  ID ระบบ : @440aburo
ร้านค้า
ถูกใจ Like เลย
มอเตอร์ไซด์ไฟฟ้า จดทะเบียน
รวมบทความและผลงาน
โฆษณา Google Adsense


พื้นที่โฆษณา แลกลิ้งค์




มีผู้ชม 2078 ครั้ง
เครื่องชาจ์ทแบต  48V / 10A
เครื่องชาจ์ทแบต  48V / 10A เครื่องชาจ์ทแบต  48V / 10A
รหัสสินค้า : MPC-4810
ราคา ฿3,000.00THB
จำนวน
48V battery charger (58.4V 10A) 

Output intelligent Lead Acid battery automatic smart charger 10A with Aluminum Case high current


Product Descriptions:
  • 2 Mode charging Quick and Slow Charging ; Use it carefully

  • Automatically select the appropriate charge mode .

  • 3 LED displays charging progress .Power led,Green ; Charging ,Red, Full charged ,Green .

  • Automatically stops charging when complete.

  • Designed for optimal heat dissipation

  • Input voltage: AC230V 50/60HZ 

  • Output voltage and current : 58.4V 10A max

  • Case Material : Aluminum Case

  • Total Weight: About 2.0kg (with plug)

  • Charger plug: We provide EU AU US or UK  plugs , we will choose type fits your country use.

Application: Only for 48V  Lead Acid Battery (12V Series 4)

 

SPECIFICATIONS ZY58.4V10A CHARGER

Totally Automatic Switch-Mode Battery Chargers

                                                                             
Summary:      58.4V10A Constant Current
 
 

  • Automatic Cut-off and then true Float. Can be left connected indefinitely without harming the battery.
  •  Input Universal (170VAC~264VAC) - Suitable everywhere in the world.
  • Many advance features described in this spec.
  • Very small size and very lightweight
  • Explanation of the Features:
     
    The advance technology of the OEM Battery Chargers is fundamentally different from other battery chargers. The conventional linear battery charger is an electrical device whereas the ZY 58.4V10A  is a lightweight sophisticated electronic device.
     
    1.  Switch-Mode Technology:
     
    Battery Charger transforms the input into charger output using high Most of the battery chargers use linear technology, which convert the 115 VAC or 230VAC to 58.4VDC at 60 Hz. This requires a large transformer, which has the disadvantage of lower efficiency resulting in higher heat generation, larger size and weight.
    The Battery Charger transforms the 90VAC~264VAC into 58.4VDC at 55,000 Hz which requires a much smaller transformer and this results in a unit of smaller size, low weight and improved efficiency.
    The ZY54.6V10A uses sophisticated electronic circuitry with microchips. All present day computers use switch-mode technology.
    2.  Input Requirements:
    a)Universal 170~240VAC    AC voltage.
    b)47 - 63 Hz
    Input AC tolerance +/- 20%. This means  ZY 58.4V10A will operate satisfactorily in areas where the input voltage is low.
    This charger is also suitable for every part of the world. where the AC is 100VAC (Japan), 115VAC (USA), 230VAC (Europe) or 240VAC (UK).
     
           3.  Output:

           10Amps Constant Current @ 58.4Volts DC
           a) Line Regulation @ Full Load 2%
           b) Load Regulation 3%
           c) Ripple Voltage: Very low
The peak-to-peak ripple voltage into a resistive load is less than 150mV for
the output voltage above 58.4VDC.
  1. Charging Cycle:
If the LED is ON ( Red ), it shows that input power is ON.
The charging curve is attached. The explanation of the charging cycle is as following.
 
Stages Condition Mode Current Voltage LED Indication
Stage 1 Constant Current mode CC mode 10A to 58.4V Red
Stage 2 Constant Voltage mode CV mode Reduces from 10A Holds at 58.4V Red
 
                 
      * CC mode = Constant current charge
      * CV mode = Constant voltage charge
      *** See Stage 2 description below
Stage 1: Constant Current Mode (CC):
The charger changes to constant current 10A. When the battery voltage reaches up to 58.4V, the charging stage changes from CC (Constant Current) to CV (Constant Voltage) mode.
Stage 2: Constant Voltage Mode (CV):
      In this stage the voltage of each cell in the battery is equalized. The charger holds the battery at 58.4V and the current slowly reduces.

5.  Two colors in one LED:

LED shows the charging status. The LED ON shows presence of input power. The bicolour LED shows Red when charging and changes to Green when the battery is fully charged.

6.  Reliability:

a)Mean Time between failures (MTBF):
30,000 power-on-hours (POH) or greater. This translates into 10 years of everyday operation of  8 hours.